Ball valves

Design: trunnion mounted and floating ball.
Types: Single body,3-piece ,Split body, Top entry and Welded.
Options: 3-ways (L- and T-)/4 –ways(x),5- ways, Rising Stem and Double Block and Bleed.
Sizes/bore in DIN/ANSI: From DN 10/1/4" to DN 900/36", full and reduced bore.
DIN/ANSI pressure class: PN 10 to PN 420, 150lbs to 2500lbs (higher on request).
API pressure class: 2000-3000-5000 -10000-15000 (Psi).
Connections: Threaded,Flanged, Wafer,Butt Weld ,Clamp(hub) and SPO(compact flanges).
Body/Ball materials: WCB,LF2,AISI 304,AISI 316,17-4 PH,CF8M,6Mo, F51,F55, B348,etc.
Seat/Trim: Viton,Devlon,PFTE, R-PFTE,PEEK,PDR or metal to metal.(others on request), Antistatic device & Anti-blow out stem,self relieving seats,stem emergency grease injectors.
Specials: Lip seal, ENP and weld overlay in all wetted parts.
Medium: Liquids,gas and steam(max 260 °C).
Functions: normally on/off, but control characteristic with “sector ” ballvalves.
Actuator types: Hydraulic single/double acting, Electric and Pneumatic single/double acting actuators.
International standard: API 6A ,API 6D/ANSI B16.10,API 6FA,ANSI/API 607,ANSI/API 608, API 598,etc.
Applications: Process, Chemical,Offshore and Naval industry.
Painting: Epoxy after NS M-501-Norsok system 1 to 7 (if applicable) or after specifications.
Makers: EU (Italy), USA and Japan.
Certification: Fire safe,Nace MR 01-75, PED,3.1/3.2, ATEX,NORSOK, etc.
Classification after customer demand, DNV, ABS,BV,Lloyds, etc..